Platter Kits
$15.00

(Engine, flying accessories and paint not included)

Priority Shipping & Handling $4.50

Included:

1. Pre-cut Foam Board
2. Motor Mount and hardware
3. 4 -Engine Screws 256 X 1/2
4. 4 - 256 Lock Nuts
5. Bellcrank w/ hardware
6. Control Horn
7. Pre-bent Pushrod Wire
8. Leadout Wire
9. Rudder
10. Balsa Elevator (improved)
11. FastCal Hinge
12. Lead-out cable

What you need:

1. .049 Engine (Cox, Brodak or Norvel)
2. Propeller (5 x 3 to 6 x 3)
3. 1/2A Fuel (15%-25% nitro, min 18% oil)
4. Sig 1/2A Control Handle with Dacron lines
5. Fuel Proof Paint (Dope, Rustoleum or Epoxy)
6. Titebond or Carpenter's Glue
7. Power Drill and bit
8. Screw Driver
9. Scotch Packing Tape for Elevator Hinge
10. Starter battery
    

0 kits in stock

Store is closed for the year...

Big Gear

The New .65-.85 size gear can support a 14" propeller. Custom made to order at

BM Pro Control Handle
- available to Woodland/Davis Flyer only
contact Brian Moore for info

Hard Point Handle with full adjustablility.

Heman Lee

 Accepted