BUILDING THE 1/2 A STUNTER
Designed by Heman Lee
Engine: Norvel Bigmig Startup .049

 

Parts List

1 Half-Lite (Snapper) Wing Core from Core House 13/32" X Balsa Sheet (Elevator and Rudder)
1 Fascal or Ultracote covering 24-40 X 1/2" screw and nut for Brodak Engine Mount
2   4Screws 2-56 x 3/4
23/16" X 1/4" Wing Spars4 Nuts 2-56 ir blind nuts
1Balsa Sheet 1/16" X 3"  X  36" Rib and sheeting13/32 Copper Tubing for Leadout Guide and Crimps
1Brodak 1/2A Motor Mount11/2A Bellcrank and Horn set
1Lead Weight 1/4 oz11/2A Wheel Set
1.055 or 1/16" Pushrod Wire and Landing Gear 1.018 Leadout Wire

Tools Needed

  1. Titebond Wood Glue or Epoxy.
  2. Model airplane dope
  3. Xacto Hobby Knife or Razor Knife.
  4. Sand Paper - 150, 220, 400.
  5. Ruler and 60/30 Triangle.
  6. Pliers with wire cutter.
  7. Electric or Cordless Drill.
  8. Monocote or Ultracote

1Foam Wing - Core House Half Lite Combat1Lead-out Guide
2Plywood 1/16 X 1 1/4 X 1214-40 X 1/2" screw, #6 Washer and blind nut
1Balsa Sheet 1/8" X 3"  X  36"7Screws 2-56 x 3/4 and washers
1.055 (1/16") music wire, .078 (5/64") music wire and 3 Plastic Wheels9Nuts 2-56
1T-Angle Motor Mount1Control Horn
1Lead Weight 1/4 oz1Bell-crank & Spacer
1.055 X 9" Pushrod Wire 1Cox Black Widow with Cox 6 X 3 prop.

Tools Needed

  1. Titebond Wood Glue or Epoxy.
  2. Model airplane dope (clear and black).
  3. Xacto Hobby Knife or Razor Knife.
  4. Sand Paper - 150, 220, 400.
  5. Ruler and 60/30 Triangle.
  6. Pliers with wire cutter.
  7. C-Clamps and some heavy weights (Brick or frying pan).
  8. Electric or Cordless Drill.
  

Building Instructions

Step 1. - Cut Parts
  
  
 

 

 

  

 

 
  

 

 

[Home] [AeroManiacs] [Aer-O-Nut] [Class] [Videos] [Calendar] [Free Plans] [Tips] [Links]
[Suppliers] [Recommendations] [Airplanes] [For Sale] [WAM] [Contact] [Bill Osborne] [Bill's Field]